Ghost Immobiliser - Protect Your Vehicle From Auto Thieves
Ghost immobilisers are low-cost, easy to install and reliable security system that safeguards vehicles from auto theft. It connects to your CAN bus, and is controlled by your ECU (engine controller unit).
It produces a unique PIN code that you have to enter prior to starting your vehicle. It can be used in conjunction with other tracking devices and car alarm systems to provide an effective defense against thieves.
Theft Prevention
If you have a ghost immobiliser installed on your vehicle, thieves will struggle to get your car started. This is because the system will require you to enter a pin number, or a specific sequence of buttons that only you know. If they cannot do this, then they will try to steal your car, and might even be stopped.
It's no surprise that owners are keen to safeguard their valuable possessions. The number of vehicle thefts is increasing each year. Ghost immobilisers can help prevent theft using contactless devices, since they make it impossible for thieves to start your car without the correct key. They also stop hotwiring - a type of theft that is becoming more frequent as thieves become more tech-savvy.
They are also inaccessible to thieves, as they do not emit radio signals. These systems are an excellent complement to other security measures, such as GPS trackers and alarms. The addition of more layers of security could make it more difficult for thieves to take your vehicle and keeping your security system up-to-date can help protect you from the latest methods employed by thieves.
ghost immobiliser car of ghost immobilisers is that it can be attached to your vehicle without leaving any marks, meaning you can keep the value of your vehicle and the look of your interior. It is connected to the CAN system in your vehicle, and makes use of the electronic buttons on your steering wheel, dashboard or door panels to generate a unique PIN number that you must input before you can start your car. It is similar to a computer password, and can include up to 20 characters.
This type of security can also be used on a variety of vehicles. It can be installed on motorbikes, cars, and even on lawn mowers that are ride-on. It is also effective against signal jamming as well as device spoofing, key cloning and other methods used by thieves to bypass security measures.
Peace of Mind
A ghost immobiliser is an inexpensive way to guard your vehicle from theft. It is also easy to install and leaves no traces or traces on your vehicle. This makes it a great choice for those who like to take good care of their vehicles especially if they intend on reselling their vehicles in the future. This is particularly advantageous for cars with a high-end look, as they may lose value if they were stolen in the past.
The device generates a unique pin number that is that is required to start the vehicle. This can be adjusted to any length and can be changed by the owner at any time. The device is then connected to the existing interface of your vehicle, like the steering wheel, the centre console, or door cards. The system can then recognise any attempts to start the engine using another fob or key and will issue an emergency PIN to the owner via their smartphone.
This is a great protection against thieves who want to replicate or hack your car's keys. They won't be able to start the car without having the correct pin code. This is a useful tool that can be used together with the tracker device to help locate your vehicle in the case of theft.
The ghost immobiliser is an excellent way to discourage thieves, since it can detect any vibrations that occur in or around your vehicle. This can be an indication that someone is trying to steal your vehicle and cause the system to notify the owner's cell phone.
If you have to give your vehicle away for cleaning or maintenance, the device can be set to "service valet" mode. This is activated by the pin code you have chosen, and is easily enabled when you return to the vehicle. You can now safely hand over your car to a valet or a transport company, knowing that the vehicle will be safe from any unintentional activity. The Autowatch Ghost II CAN immobiliser can also be put in 'service transport mode' when you need to transport it from one garage to another, as in the process of preparing for an MOT or service.
Increase the value of your vehicle
In a time of car thefts that are at an all-time peak it is crucial that drivers do their best to keep their cars safe. Technology is constantly evolving and developing new anti-theft solutions. One of these is the Ghost Immobiliser, a device that can be fitted inside your vehicle to turn off the engine when a particular PIN code is entered.
The Ghost Immobiliser works in a very simple and efficient way. It communicates with your vehicle's ECU via the CAN data circuit in order to generate a unique code that you have to enter to start your vehicle. The device doesn't emit radio signals, like traditional immobilisers. This makes it impossible for thieves and others to detect or disable the system. Instead it requires a PIN code that can be entered through existing buttons on your dashboard or steering wheel.
The best thing about a ghost immobiliser is that it is hidden and completely unobtrusive, so it is not something that would detract from your car's style or performance. It's a subtle and low-maintenance alternative that can be installed on any vehicle, and will not interfere with the normal functioning of the vehicle.
A ghost immobiliser could also aid in maintaining the value of your vehicle when you decide to sell it. Installing this device can assist you in selling your car for a higher price in the future. Potential buyers may be wary about buying the vehicle that was stolen.
It's a great idea to consider advanced security features for your vehicle particularly with car theft rates in Essex and London are on the rise. Ghost immobilisers are a discreet and effective option that can be easily fitted by professional installers like Essex Tuning, which offers Ghost Immobiliser installation near you to make the process as simple as is possible. The company's commitment to customer service and enhancement of security means that you can trust them with your vehicle's security and safety.
Easy to Install
A ghost immobiliser adds an additional layer to your security system, deterring tech-savvy thieves from cloning your car and stealing it. It makes it difficult for thieves to gain access to your vehicle, even if you have the right keys. It uses buttons inside your vehicle, such as those on your steering wheel and centre console, to generate an unique sequence of pin codes that need to be entered to begin the operation of your vehicle. If you have an installed Ghost system it is the only person to drive your pride-and-joy.
The device is small, and can be concealed in a variety of places. It doesn't have any LED indicators or key fobs which means it's unlikely to be detected by potential thieves. It's also tamperproof and only activated by your personal PIN code. You can alter your code at any time. It's an excellent way to safeguard your vehicle from hackers and thieves who may be planning to hack your vehicle or replicate it.
Installation is a process that requires expertise that must be handled by an expert. It involves wiring the Ghost 2 into the vehicle's CAN bus network, so it can communicate directly with the ECU. It is compatible with any vehicle, from motorhomes to vans and cars. It can even be used on vehicles with electric motors like ride-on mowers.
The first step in putting in the Ghost immobiliser is to find a power source that will ensure a continuous supply of 12V. Then, use an electrical diagram to identify the CAN High and Low wires in your vehicle. With a stripper, you can strip a small portion of the insulation from each wire. Then, mark the wires with labels or a piece of tape to help you differentiate them from one another during the installation process.
Connect the CAN H wires as well as CAN L to your vehicle's engine control unit. Make sure that you are able to connect them securely by soldering or using high-quality connectors. It is also recommended to use cable tie to secure and bundle the wires. Finally, double-check the connections of the wires to ensure that they are insulated and solid.